gets tenders nzgovernment tenders nzcouncil tenders nz9 November 2026

GETS Tenders NZ: Setting Up Government and Council Tender Alerts

Set up GETS tenders NZ alerts that match your trade, cover council portals GETS misses, and know when a paid tender feed is worth paying for.

GETS Tenders NZ: Setting Up Government and Council Tender Alerts

GETS tenders NZ alerts are only useful if they match the work you can win. Register a free supplier account on GETS. Choose the UNSPSC categories that fit your trade and set your regions. Then cover councils separately, because not every council advertises everything on GETS. Add a paid tender feed only when you watch so many buyers that manual checking stops being reliable. This guide covers each step and how to run public tenders alongside your private work.

Where NZ public construction work gets advertised

Before you set up any alert, know where the notices are published. Most missed tenders come from watching the wrong place, not from bad alert settings.

GETS

GETS is the Government Electronic Tenders Service. New Zealand Government Procurement runs it, within MBIE. Agencies covered by the Government Procurement Rules publish opportunities there, and many other public buyers use it voluntarily. Suppliers register and receive notifications for free.

The Rules decide which agencies must advertise openly and from what contract value. Those settings get reviewed. Check the current version at procurement.govt.nz rather than relying on a threshold someone quoted on site.

Councils

Councils set their own procurement policies. Many publish larger contracts on GETS. Others use a third-party tender portal or a paid aggregation service. Some list smaller work on their own website. Some send it straight to a panel or prequalified supplier list and never advertise it openly.

So assume nothing. For every council in your area, find the procurement or doing business with us page. Note where they advertise, whether they run panels, and what you need to register.

How to set up GETS alerts step by step

This takes under an hour. Do it properly once and you will not need to revisit it every week.

  1. Register as a supplier on gets.govt.nz. Use a shared address such as tenders@ rather than a personal inbox, so notices survive staff changes and holidays.
  2. Complete your business profile. Add your NZBN and accurate contact details. Buyers sometimes see this information.
  3. Choose your UNSPSC categories. These codes decide which notices reach you. The next section covers how to pick them.
  4. Set your regions where your notification settings allow it. Be honest about how far you will travel and still price competitively.
  5. Test your setup. Search current and recently closed notices for your trade. Open the ones you would have wanted, check which codes the buyer used, and add any you missed.
  6. Create an inbox rule that flags GETS notifications so they do not sink under supplier invoices.
  7. Log in and download documents through GETS when a tender interests you. That puts you on record for that opportunity, so you are notified about changes and buyer responses to questions.

Step 7 matters. Contractors lose tenders because they priced an old drawing set after an update was issued. If you grabbed the documents from a forwarded email, you may never see the change.

Choosing categories that actually match your work

UNSPSC is an international product and service coding scheme. Buyers pick codes inconsistently. A council reroofing job might sit under roofing services, building maintenance or general building construction, depending on who wrote the notice.

Use these rules:

  • Start from past notices, not the code list. Reverse engineer the codes buyers actually used for work like yours.
  • Avoid ticking a whole top-level construction segment. You will get every civil, fit-out and facilities notice in the country, then start ignoring the emails.
  • Include maintenance and repair codes as well as new construction codes. A lot of steady public work is reactive and planned maintenance.
  • Add adjacent trades you subcontract confidently. If you regularly deliver small works packages, include them.
  • Review after four weeks. Count how many alerts were relevant. If fewer than a few in ten are worth opening, narrow the codes. If you find tenders through other channels that GETS should have caught, widen them.

Covering council work GETS will not show you

Build a simple council source list. A spreadsheet is enough. For each council or council-controlled organisation, record:

  • where it advertises tenders
  • any supplier registration or portal account you need
  • current panels and when they are due to be refreshed
  • contact details for the procurement team
  • the date you last checked

Register on every portal where you want to compete. Then set its alerts the same way you did on GETS.

Pay close attention to panels. For maintenance and minor works, getting onto a council panel can matter more than chasing one-off tenders. Panels open on a cycle, often years apart. Missing the panel refresh can lock you out of a steady stream of work until the next round.

When a paid feed beats free alerts

Free alerts are enough for many contractors. A paid aggregation feed starts to earn its fee when your situation looks like this.

Free alerts usually cover you if

  • you work in one or two regions
  • most of your target buyers publish on GETS
  • you only need to track a handful of council portals
  • someone checks the source list every week without fail

A paid feed is worth testing if

  • you bid across several regions with many councils using different portals
  • you want public and private-sector tenders in one place
  • you have already missed a tender you were well placed to win
  • checking portals by hand is eating time your estimator should spend pricing

Before you subscribe, ask the provider which councils and buyers it actually covers in your regions. Compare that list with your spreadsheet. Ask for a trial and run it alongside your free alerts. If it surfaces relevant work you would otherwise have missed, the decision is easy. If it mostly duplicates GETS, keep your money.

A weekly routine for triaging notices

Alerts only work if someone acts on them. Set one fixed time each week, and a quick daily scan for short closing dates.

Illustrative example, not a real business: a Waikato roofing and cladding contractor checks alerts each Monday. Each notice gets a quick go or no-go against a short checklist:

  1. Is this work we deliver well, at this size?
  2. Is it in a region we can service at a sensible cost?
  3. Can we meet the closing date without dropping private quotes?
  4. Do we meet the prequalification, insurance and health and safety requirements?
  5. Are the contract form and payment terms acceptable, such as an NZS 3910 based contract?
  6. Do we know the buyer, or have relevant references?

Two or more doubtful answers usually means no-go. A clear no early beats a rushed bid you were never likely to win.

Be ready before the right tender lands

Most public tenders give you limited time. Contractors who win regularly have the boring documents ready before the notice arrives. Keep a bid library with:

  • current insurance certificates
  • your health and safety documentation and any prequalification the buyer may ask for, such as a Totika-recognised assessment
  • Licensed Building Practitioner details where the work requires them
  • three or four project case studies with photos and referee contacts
  • CVs for the people who would actually run the job
  • standard method statements you can adapt

Update it every quarter. When a good tender lands, you are tailoring, not starting from scratch.

Keep private work in the same pipeline

Public tenders are lumpy. You might bid on several and win one, months later. Private clients and repeat relationships keep the crews busy in between. The risk is that tender season pulls attention away from following up private quotes.

Plan@Job is AI-powered project and operations management for construction and property businesses. It is built for the operator, meaning the contractor business that manages clients, project delivery, subcontractors and in-house operatives. It does not monitor GETS or council portals, so keep your tender alerts as they are. What it does is keep the private side of your pipeline moving:

  • Project plans split each job into internal stages with scope, dates, status and costs, for both subcontracted and in-house delivery. Clients see the agreed overall scope and price plus shared evidence. Internal stage costs and subcontractor identity stay internal. See project management.
  • AI staff work in the background. Daniel Reed, the AI Operations Manager, supports quote and proposed-date follow-ups and prepares a morning brief. Decisions on awards and prices stay with you. See AI staff.

The UK is the live market for this launch. New Zealand contractors can reserve a place through the Plan@Job NZ contractors page.

Your next step: spend an hour this week registering on GETS, testing your categories against last quarter's notices, and starting your council source list.

FAQ

Is GETS free for contractors?

Yes. Registering as a supplier, receiving notifications and downloading tender documents on GETS is free. Some third-party portals and aggregation services that cover council work charge a subscription.

Do all NZ councils post tenders on GETS?

No. Many councils use GETS for some contracts, but others use their own website, a third-party portal or supplier panels. Check each council's procurement page and keep a source list.

How many UNSPSC codes should I choose on GETS?

There is no right number. Choose every code buyers have actually used for your type of work, then review after four weeks. Too many irrelevant alerts means narrow the codes. Tenders found elsewhere that GETS missed means widen them.