Boiler service cost in the UK is not one fixed figure. What you pay depends on the fuel, the boiler type, where the property is, and whether the visit also covers the landlord gas safety check. The short answer for a property manager is this: get two or three written quotes for the same scope, pay for a proper service and not a quick look, and book every boiler once a year. For gas appliances in rented homes, the yearly safety check is a legal duty, not a choice.
This guide does not quote a price, because any single number would be wrong for most of your portfolio. It shows you what moves the price, how to compare quotes fairly, and how often to book.
Published 15 November 2026.
What a boiler service should include
A service is maintenance. The engineer opens the boiler, inspects it, cleans it where needed, tests it and tells you what condition it is in. The exact tasks come from the manufacturer's instructions for that model.
A reasonable service on a gas boiler usually covers:
- A visual check of the boiler, pipework and flue
- Removing the casing to inspect the main components
- Checking gas pressure and how the boiler is burning
- A flue gas analysis to confirm safe combustion
- Checking seals, the condensate trap and the condensate pipe
- Testing safety devices and controls
- Checking system pressure and looking for leaks
- A written record of what was done and any faults found
If a quote does not say what is included, ask. A very low price often means a short visit with the casing left on.
A service is not the same as a gas safety check
This catches people out. The landlord gas safety check is the legal check on gas appliances, fittings and flues in a rented property. It produces the gas safety record, often still called a CP12. A service is the maintenance work on the boiler itself.
Many engineers do both in one visit and price them together. Some price them separately. When you compare quotes, make sure you know which one you are looking at. Two quotes can look far apart only because one includes the safety record and the other does not.
What drives boiler service cost
These are the things that move the price up or down.
- Fuel. Oil boilers generally cost more to service than gas ones, because the work is more involved and parts such as the nozzle are often replaced. LPG needs an engineer registered for LPG.
- Boiler type and age. A modern combi in a kitchen cupboard is quicker than an old back boiler or a system with a separate cylinder.
- Location. Labour rates vary by region. Travel and parking add cost in city centres and remote areas alike.
- Access. A boiler in a loft, behind fitted units or in a flat with restricted entry takes longer.
- What else is in the visit. A gas safety check, extra appliances such as a hob or gas fire, or a smoke and carbon monoxide alarm test all change the total.
- One-off or plan. Some firms offer a service plan with a regular payment that includes the annual service and some repair cover. Read what is excluded before you compare it with a one-off price.
- Volume. Several properties in the same area, booked together, can often be priced better than single visits.
- Time of year. Engineers are busiest once the heating goes on. Summer bookings are easier to get and sometimes cheaper.
What to pay: how to compare quotes fairly
You cannot judge a price until the scope is the same on every quote. Work through this list.
- Write one clear brief. Address, fuel, boiler make and model if known, where the boiler is, how many gas appliances are in the property, and whether you need the gas safety record as well as the service.
- Send the same brief to two or three firms. Local firms that already cover the area are usually the sensible start.
- Ask what is included. Flue gas analysis, casing removed, written service record, and any small parts.
- Ask about the extras. Call-out for a missed appointment, a second visit if the tenant is out, parts, and VAT.
- Check registration yourself. For gas work the engineer must be on the Gas Safe Register and registered for that type of work. You can check on the Gas Safe Register. For oil, look for an OFTEC registered technician.
- Compare the total for the year, not the headline price. A slightly dearer firm that turns up, sends the paperwork and deals with access problems can cost you less overall.
The right price is the fair local rate for the full job, done by someone qualified, with a record you can file. It is rarely the lowest number on the page.
How often to book
Gas boilers in rented homes
Book once a year. Landlords must have gas appliances, fittings and flues checked every 12 months by a Gas Safe registered engineer, and must keep the record and give a copy to the tenant. The current rules allow some flexibility on timing so you can book ahead of the due date. Check the detail on the HSE guidance for landlords before you rely on it, and check the equivalent rules if you manage homes in Northern Ireland.
Landlords also have a duty to keep gas appliances maintained in a safe condition. In practice that means servicing in line with the manufacturer's instructions, which for most boilers means yearly. Doing the service and the safety check in one visit is the tidy way to meet both.
Oil, LPG and electric boilers
Oil boilers do not need a gas safety record, but a yearly service by a competent technician is the normal standard and most manufacturers expect it. LPG appliances are gas appliances, so the yearly check applies. Electric boilers have no combustion to test, but still follow the manufacturer's maintenance instructions.
Warranties
Many boiler warranties depend on a service every year, with proof. Check the terms for each boiler. A missed service can leave the owner paying for a repair the manufacturer would otherwise have covered.
The best time of year
Book in late spring or summer where you can. Engineers have more room in the diary, tenants are less affected if the heating is off for an hour, and any fault found can be fixed before the cold weather.
What needs your decision
Some parts of this can be organised for you. Some stay with a person.
- Who you appoint, and at what price
- Whether to approve a repair the engineer recommends, or get a second opinion
- Whether to repair or replace an ageing boiler, which is usually the owner's call
- How access is arranged with the tenant, and what you do after a failed visit
- What happens if an appliance is found unsafe
If an engineer tells you an appliance is unsafe, act on it straight away. Do not wait for the next routine visit.
An illustrative example
This scenario is fictional. A letting agent manages twelve flats in one town. The gas safety due dates are spread across the year, so an engineer visits almost every month and each trip is priced as a one-off.
The agent lists every boiler with its fuel, model and due date. They write one brief covering service plus gas safety check for all twelve, and send it to three local firms. They pick one firm, agree a per-property price, and group the visits into two blocks, using the timing flexibility in the rules where it applies. Tenants get notice of the dates. The agent now has one price, two booking rounds and one place for the records.
No savings figure is claimed here. The point is the method: same scope, grouped visits, one clear record.
Booking annual servicing through Plan@Job
Plan@Job is AI-powered project and operations management for construction and property businesses. Property maintenance is one of its main uses, and annual servicing fits it well. The UK is the live market.
The service itself is done by a contractor, and that arrangement is agreed with the contractor. It does not come bundled with a software account. What Plan@Job gives you is a clear way to run the job.
- The brief. The servicing job starts with a written brief. Sophie Bennett, the AI Enquiries Coordinator, checks job briefs for missing information and asks for clarification. If it is still unclear after two attempts, she hands it to a person.
- Quotes and dates. Daniel Reed, the AI Operations Manager, supports follow-ups on quotes and proposed dates, so a booking does not stall while everyone waits for a reply. He does not award work or set prices. Those stay with people.
- What you see. As the client you see the overall agreed scope and price, and the evidence shared with you for the job.
You can read more about how the AI staff work. You still check the engineer's registration, approve the price and keep your legal records. The software keeps the job organised. It does not take over your duties as a landlord or agent.
If you want one place to book and track annual servicing across your properties, start with the Plan@Job page for UK property managers.
FAQ
Is an annual boiler service a legal requirement for landlords?
The yearly gas safety check is a legal requirement for gas appliances in rented homes. Landlords must also keep gas appliances maintained in a safe condition, which normally means servicing as the manufacturer instructs. For most boilers that is once a year.
Can the service and the gas safety check be done in one visit?
Yes, and most property managers book it that way. Ask for both in the brief and make sure the quote covers both. You should receive the gas safety record and a service record.
Why do boiler service quotes vary so much?
Usually because the scope is different. One quote may include the gas safety record, flue gas analysis and VAT. Another may not. Fuel, boiler type, access and region also change the price. Send every firm the same written brief and the quotes become much easier to compare.
