property de icing supply inventoryice melt inventory for propertiesde-icing supplies Canada22 November 2026

Property de-icing supply inventory for property managers

Build a property de-icing supply inventory that lasts all winter in Canada: what to stock, how to count it, when to reorder and who signs off.

Property de-icing supply inventory for property managers

A property de-icing supply inventory is a simple, per-site record of the melt products, traction materials, tools and safety gear you hold, with a reorder point set before the first storm and one named person who counts it. That is the whole answer. The rest of this guide covers what to stock, how to set reorder levels without guessing, how to store product so it still works in February, and which decisions need a person rather than a spreadsheet.

Why de-icing stock runs out at the wrong moment

Most shortages are not caused by under-ordering in October. They happen when three things line up: freezing rain events back to back, a supplier that is out of bagged product across the region, and nobody having counted the bins since the last storm.

The usual causes:

  • Stock held at one place, often the main building, while outlying sites go bare.
  • Bags left open or stored on a wet floor, so the product clumps and won't spread.
  • The contractor and site staff each assume the other is restocking.
  • Orders triggered by an empty bin rather than a set level.

Fix the counting and the ownership, and the ordering largely sorts itself out.

What to stock at each property

Keep the list short and use the same item names at every site. Consistent names make counts easy to compare across a portfolio.

Melt products

  • Rock salt (sodium chloride) for general walkways and parking lots. Widely available and usually the cheapest option, but it slows down sharply in deep cold and is hard on concrete, plants and pets' paws.
  • Calcium chloride or magnesium chloride for colder days and trouble spots such as north-facing steps and ramps. These work at lower temperatures than rock salt.
  • A gentler product, such as potassium acetate or a blend labelled for concrete or pets, for new concrete, pavers, balconies or entrances where residents have raised concerns.

Each product's label states its working temperature and application rate. Those figures vary, so copy them onto your inventory sheet rather than relying on memory.

Abrasives and traction

Sand, grit or a sand and salt mix for days when it is too cold for melt to do much. Abrasives give grip; they do not melt ice. Plan for the spring sweep-up too, because grit tracked into lobbies, garages and drains becomes its own maintenance job.

Tools and storage

  • Walk-behind spreaders and hand-held shakers.
  • A scoop for each bin.
  • Ice choppers or scrapers for steps.
  • Lidded, weatherproof bins at every entrance that gets treated.
  • Pallets or racking so bags stay off the floor.

Safety and records

  • Gloves, eye protection and ice cleats for anyone applying product.
  • Safety data sheets for each product kept on site.
  • A shared sheet or clipboard for counts and application logs.

Occupational health and safety rules are set provincially, with some federal workplaces under federal rules. Check the current requirements in your province for handling and storing these products and for anyone working on your sites.

How to set reorder points without guessing

A reorder point is the level at which you place an order, not the level at which you run out. Set one for each item at each site:

  1. Pull last winter's records. Delivery slips, contractor invoices and application logs. Work out roughly how much each site used per event.
  2. Estimate a bad week. Count how many applications your worst stretch needed last season.
  3. Add real lead time. Ask your supplier how long deliveries actually took during last year's cold snaps, not their standard quoted time.
  4. Set the reorder point at enough product to cover that bad week plus the lead time.
  5. Set a maximum based on how much your storage can hold dry.

If you have no records, start on the cautious side, log every application this season and adjust in March. One season of honest logs beats any rule of thumb.

Count on a rhythm

  • Before the season: full count at every site, plus a check of bins, lids and spreaders.
  • After every event: quick visual check and a note of bags used.
  • Weekly through winter: proper count against the sheet.
  • End of season: final count, leftovers stored dry, total usage recorded for next year.

Storing de-icing supplies so they still work

Moisture is the main problem. Calcium chloride in particular pulls water from the air and will cake or turn liquid in an open bag. Keep bags sealed, off the floor and under cover. Keep any bulk salt on a hard, impermeable surface, covered, and away from drains, landscaping and wells, so runoff does not end up where it shouldn't.

Environment and Climate Change Canada publishes a Code of Practice for the environmental management of road salts. It is written for road authorities, but the storage guidance is useful for larger sites. In Ontario, the Smart About Salt Council offers training and certification for winter maintenance. Both are worth reading before you choose storage spots or brief a contractor. Your municipality may also have its own expectations, so check locally.

Who decides what

The inventory supports the work. The real decisions sit with people, and they should be written down before the first snowfall.

  • Responsibility for clearing. Who clears which areas depends on the lease, condo or strata bylaws, your winter maintenance contract and provincial tenancy rules. Municipal bylaws often set expectations for public sidewalks next to a property. Confirm these with current local sources and do not assume one province's rules apply in another.
  • Who supplies the product. Some winter contracts include material, some charge per application, some expect the owner to supply it. The contract should say which, area by area.
  • Product restrictions. A property manager may rule out chlorides on a new concrete plaza or pavers. The contractor needs that in writing.
  • Approval of extra spend. Decide who can approve an emergency order or extra applications, and up to what limit.
  • Who counts. One named person per site. A role is fine, as long as it maps to someone specific.

Illustrative example

This is a fictional scenario to show the workflow.

A property manager looks after four low-rise residential buildings in one city. Winter maintenance is contracted out. In past years, product sat at the largest building and the contractor's crew drove over to collect it, losing time on the worst mornings.

This season the manager sets up one sheet with the same item list for each building, a reorder point per item and a column for weekly counts. Lidded bins go at every treated entrance. The contractor's crew lead logs bags used after each event. The superintendent at each building does the weekly count. When an item reaches its reorder point, the superintendent flags it and the manager approves the order. The contract states that the contractor brings its own product for the parking lots and the owner supplies bagged product for entrances, so nobody double-orders.

Nothing in that example needs special software. It needs a clear list, set levels and named people.

Where Plan@Job fits

Plan@Job is AI-powered project and operations management for construction and property businesses. It is not a stock-control system and does not track bag counts, so keep your inventory in the sheet or system you already use. Plan@Job is for the work around it: the jobs, the contractors and the follow-ups.

A winter maintenance job can carry the site, the entrances in scope, product restrictions and access notes. The operator, meaning the contractor business that manages its clients, project delivery, subcontractors and in-house operatives, takes the job from there. Plan@Job's AI staff work in the background. Sophie Bennett, the AI Enquiries Coordinator, checks job briefs for missing information, such as which entrances are covered, and asks for clarification. Daniel Reed, the AI Operations Manager, supports quote and proposed-date follow-ups and prepares a morning brief. Awarding work and agreeing prices stay with people. The AI staff page explains what each one does.

Plan@Job's live launch market is the UK. For Canadian property managers, the Canada property managers page is where to check availability and register interest. Winter maintenance contractors can use the Canada contractors page.

FAQ

How much de-icing product should a property keep on hand?

There is no universal figure. Base it on your own usage per event, your worst week last winter, supplier lead time during cold snaps and how much you can store dry. Log usage this season and adjust next year.

Should I use rock salt or calcium chloride?

Many properties hold both. Rock salt for general use in milder cold, calcium or magnesium chloride for colder days and trouble spots, and a gentler product for sensitive surfaces. Check each label for its working temperature and application rate.

Who restocks de-icing supplies, the property manager or the contractor?

Whoever your contract names. If it is silent, fix that before the season starts. Write down who supplies product for each area, who counts it and who approves orders.